Multi Carrier HXF 2302

GreenTec
GreenTec

Strong Arguments:

  • Mounted on skid steer loaders and compact tractors

  • High road safety

  • AHS, Automatic Hydraulic Break-back

  • 25 l/min flow divider standard

  • Build in anti-cavitation valve

  • Easy attachment system

  • Compatible with 5 attachment tools

 

5 different tools can be mounted on the HXF 2302Multi Carrier HXF 2302, oilflow 25 l/minMulti Carrier HXF 2302 is supplied with AHS

 

Boom mower for compact tractors and skid steer loaders

 

The new low weight Multi Carrier is a boom mower specifically build for skid steer loaders, mini loaders, mini excavators and compact tractors.

 

The Multi Carrier HXF 2302 is particularly distinguished by its lightweight, compact and inexpensive design. This ensures a perfect match for smaller carrier vehicles exceeding 1,200 kg. The Multi Carrier is hydraulic driven by the carrier vehicle's pumping system.

 

 

Boom mower compatible with quadsaws, cutterbars and barrier mowers

 

The following attachment tools can be fitted to the Multi Carrier HXF:

  • Quadsaw LRS 1402
  • Rotary Hedge Cutter RC 102
  • Cutterbar HL
  • Barrier Mower Ri
  • Weed Clearing Brush BR 70

 

A hydraulic and mechanical quick release system makes it extremely easy to swap working tools.

 

Through the compact and inexpensive construction, the Multi Carrier HXF 2302 is a small investment for a multipurpose solution. This in particular applies for use in the municipal sector, as wells as in gounds maintenance, and in industrial and agricultural areas.

 

Specifications Multi Carrier HXF 2302
Reach from center with Quadsaw LRS 1.8 m
Reach from center with Barrier Mower Ri 80 2.4 m
Transport width 1.3 m
Required oil flow 25 l/min
Weight 110 kg

 

 

Standard Equipment
Manual switch from working to transport position
Mechanical cutting angle control
Quick release couplings – no tools needed
AHS, automatic hydraulic security (break-back)
Flow divider, minimum oil requirements 25 l/min
1.5 m hosekit for working tool
EURO Brackets

 

Standard Equipment
Multi Carrier is the most road safe solution on the market
AHS, Automatic Hydraulic Security (Break-back)
Manual switch from working to transport position
Flow divider, minimum oil requirements 25 l/min
Mechanical cutting angle control
Mechanical quick release
Hydraulic quick release
The Multi Carrier is available for right or left mounting
1.5 m hosekit for working tool
Euro brackets
The Multi Carrier is very stable stored on the support legs, which makes mount and dismount very easy

Optional Equipment
OPTE6000
Hydraulic angle control incl. 1.5 m hosekit
OPTE6500
E-Control for hydr. angle control and tool. (hydr. angle control included)
OPTE3500
Counter weight, 55 kg
Brackets are available for all types of carrying vehicles - See list at the bottom of this page

Brackets – click to enlarge the drawings
OPTE4000
EURO brackets
OPTE4001
Schäffer brackets
OPTE4002
Schäffer Teleskopbrackets
OPTE4003
Avant brackets
OPTE4004
Weidemann brackets
OPTE4005
Trima brackets
OPTE4006
Giant brackets
OPTE4007
Stoll CompactLine brackets
OPTE4008
Schäffer small standard brackets
Quadsaw LRS 1402
A small powerful quadsaw with a working width of 1.4 m
Rotary Hedge Cutter RC 102
Cut and chop in a single pass, with a working width of 1.0 m
Cutterbar HL 150 - 210
Cutterbar for maintenance of hedges and fences
Barrier Mower RI 60 & 80
The perfect tool to cut under fences
Weed Clearing Brush BR 70 & 90
Effective cleaning of tiles, asphalt and paving stones
9992302R 9992302R
HXF 2302, Right
9992302L 9992302L
HXF 2302, Left

Safety Break-Back System

SAFETY BREAK-BACK

Multi Carrier is fitted with AHS, Automatic break-back with tool prepressure as a standard.

 

 

 

Flow divider

FLOW DIVIDER

Multi Carrier is as a standard fitted with a flow divider that control the oilflow to the working tool. This increases the safety and life of your working tool.

 

 

 

Hydraulic connections and oil flow

 

Multi Carrier HXF 2302 mounted with:

Quadsaw LRS 1402: 1 x DA: 25 l/min + 1 no-pressure return (drain)

Rotary Hedge Cutter RC 102: 1 x DA: 25 l/min + 1 no-pressure return (drain)

Cutterbar HL 150: 1 x DA: 25 l/min

Barrier Mower Ri 80: 1 x DA: 25 l/min + 1 no-pressure return (drain)

Weed Clearing Brush BR 70: 1 x DA: 25 l/min

 

Multi Carrier HXF 2802 mounted with:

Quadsaw LRS 1402: 1 x DA: 25 l/min + 1 no-pressure return (drain)

Quadsaw LRS 1601: 1 x DA: 40 l/min + 1 no-pressure return (drain)

Rotary Hedge Cutter RC 132: 1 x DA: 40 l/min + 1 no-pressure return (drain)

Cutterbar HL: 1 x DA: 25 l/min*

Barrier Mower RI 80: 1 x DA: 25 l/min + 1 no-pressure return (drain)

Weed Clearing Brush BR 70: 1 x DA: 25 l/min

 

Multi Carrier HXF 3302 mounted with:

Quadsaw LRS 2002 og 2401: 1 x DA: 50 l/min* + 1 no-pressure return (drain)

Rotary Hedge Cutter RC 162: 1 x DA: 40 l/min* + 1 no-pressure return (drain)

Cutterbar HX 170 – 230: 1 x DA: 50 l/min*

Cutterbar HS 200: 1 x DA: 45 l/min

 

HXF 2302 - 3302

Hydraulic angle control: Additional 1 x DA**

 

*All Multi Carrier HXF models are delivered with flow divider as a standard.

This ensures that the working tool will never receive oilflows that exceed the motor capacity.

**only 1 x DA is required when fitted with electric control incl. cutting angle and flow divider. (Plus 1 x zero pressure return, drain, where required).