Flail Mower FR 122 with belt

GreenTec
GreenTec

STRONG ARGUMENTS:

 

  • 25% higher power and energy savings with Integrated Airflow
  • Weight reduction of 20% by using Strenx 700 steel
  • Integrated rotor bearings reduce the overall width
  • Power Belt drive ensures minimal maintenance
  • Double spiral rotor with uniform flow
  • The conveyor belt can drive both ways

 

The Flail Mower FR 122 has a working width of 1.2 m (3'11")The Flail Mower FR 122 cuts branches up to 4 cm (1.57”) in thicknessThe Flail Mower FR 122 has a maximum driving speed of 7 km/h (4.35 mph)The Flail Mower FR 122 weighs 385 kg (849 lb)

 

Embankment flail mower for maintenance of rivers, canals, dams and streams

 

The Flail Mower FR 122 (with belt) is based on a standard FR 122 model, which is equipped with a hydraulically driven conveyor belt that throws the cut-off material away from the work area.

 

The Flail Mower FR 122 (with belt) is suitable for mowing embankments and ditches near water areas, such as streams, creeks, lakes, rivers, canals and dams. The hydraulic belt makes sure that the cut-off material does not end up in the water by launching it the opposite way towards the top of the bank. This will prevent overflooding and protect the pumping stations.

 

The conveyor belt is pulled hydraulically via the tractor’s hydraulics. It can drive both ways, simply by changing the rotation of the hydraulics. If you want to drive without the function of the belt, it can be folded up through a hydraulic cylinder.

 

The Integrated Airflow system is one of the main features of the FR series. The space between the rotor and the shield is purposely designed to increase the air velocity so the cut-off material exits the mower as quickly as possible. It creates a natural vacuum that sucks the grass into the mower. This increases the capacity of the flail head and reduces the power requirement.

 

The flail mower is available in a working width of 1.2 m (3'11") and are suitable for contractors and farmers that want the best mowing equipment in the market. You can achieve a driving speed of up to 7 km/h (4.35 mph) which enhances the efficiency significantly.

 

The main bearings are integrated in the rotor shaft which reduces the total width of the flail head. 

 

The machine is manufactured in Strenx 700 high strength steel which is one of the most durable steel types in the world. It is the same material that is used for chassis in the automotive industry. The flails are adapted to the rotor to stop breakage and damage from happening. These measures keep the maintenance costs at a low level.

 

The Flail Mower FR 122 is hydraulic driven and can be mounted on our Scorpion boom mowers for tractors or directly on the arm of diggers. When mounted on GreenTec’s Scorpion boom mowers, an integrated hydraulic hose set can be purchased.

 

 

The Flail Mower FR 122 fits the following GreenTec machines:

 

  FR 122 FR 162
Boom Mower Scorpion 330 & 430    
Scorpion 530 & 630 Check mark Check mark
Scorpion 730 & 830 Check mark Check mark
TECHNICAL DATA FR 122
Working width 1.2 m
(3'11")
Branch thickness 4 cm
(1.57")
Driving speed up to

5 - 7 km/h
(3.11 - 4.35 mph)

Required hydraulic connections 1 x double acting + 1 x drain
Required oil flow 85 l/min @ 230 bar
(22.5 gpm @ 3336 psi)
Required oil flow 85 l/min @ 315 bar
(22.5 gpm @ 4569 psi)
Weight 385 kg
(849 lb)

 

 

EQUIPMENT OVERVIEW  
Hydraulic belt Standard equipment
Integrated Airflow Standard equipment
Optimized total width Standard equipment
Power Belt drive Standard equipment
Strenx 700 steel construction Standard equipment
Double spiral rotor Standard equipment
Equipped with C-flails Standard equipment
Rubber protection in front and back Standard equipment
Adjustable front Standard equipment
Rounded rear roller Standard equipment
Hydraulic quick release Optional equipment
Mechanical quick release Optional equipment
Hose set, complete, incl. hydraulic quick release Optional equipment
L-flails Optional equipment
T-flails Optional equipment

 

 

Standard equipment = Standard equipment

 

Optional equipment = Optional equipment

Standard Equipment
Flail type C, FR 122 (28 pcs.)
Flail type C, FR 122 (28 pcs.)

Optional Equipment
OPTE1085.1
Adapter FR122B / SC 6-8 P (OPTE1085.1)
OPTE1093.7
Hydr. quick rel. FR 122B / SC 6-8P (OPTE1093.7)
OPTE1091
Quickcoupling mech. FR 122-162 / SC 6-8 (OPTE1091)
OPTE1302
Flail type L, FR 122 (28 pcs.) (OPTE1302)
OPTE1304
Flail type T, FR 122 (28 pcs.) (OPTE1304)
9990122R-85PD 9990122R-85PD
FR 122 (85 l/min), right handed, Scorpion PLUS, belt
9990122R-85SD 9990122R-85SD
FR 122 (85 l/min), right handed, Scorpion S, belt