Twiga COMPACT Basic
- Many variations: Rear, Front and Combi mount
- MiniPilot, electrical proportional joystick control
- Parallel arm geometry
- Lightweight and compact
- Wide range of working tools
Front and rear mounted arm mower
The Twiga COMPACT Basic unit is characterized by tool and reach arm function are driven by the tool carrier’s hydraulic system.
Skid steer loaders and Municipal vehicles typically have a hydraulic system that is strong enough to serve the Twiga COMPACT series. The machine will be fitted without PTO. Only requirements are constant hydraulic supply of at least 50 l/min, max. 180 bar.
GreenTec delivers a wide range of brackets, so the Twiga COMPACT can be installed and uninstalled in minutes.
The Spearhead Twiga COMPACT series is a compact reach mower designed for compact tractors. The Twiga can be used anywhere in the municipal and private sectors; parks, sports fields, bike paths, orchards - and other places where space is limited.
There are a wide variety of attachment tools for both grass and hedges that extends the versatility and flexibility throughout the season.
|Technical data||low 360*||320||420|
|Horizontal reach with 0.9 m flailhead||3.6 m||3.2 m||4.2 m|
|Vertical reach with Cutterbar HL||4.5 m||4.5 m||5.2 m|
|Transport width||2.0 m||1.8 m||1.8 m|
|Min. tractor size||1,700 kg||1,300 kg||2,000 kg|
|Weight w/o tool||360 kg||380 kg||410 kg|
|Mini Pilot E. Prop. joystickcontrols|
|Float head angle|
|Parallel arm geometry|
|Hydraulic break-back on arm|
|3-point linkage (Cat 1 and 2)|
Flailhead for Twiga Compact
A small powerful quadsaw with a working width of 1.4 m
Quadsaw with a working width of 1.6 m
Cut and chop in a single pass, with a working width of 1.0 m
Cut and chop in a single pass, with a working width of 1.3 m
Cutterbar for maintenance of hedges and fences
|Front mount||Rear mount|
|Reach||TWIGA COMPACT 360||Twiga COMPACT 320||Twiga COMPACT 420|
|A*||3.6 m||3.2 m||4.2 m|
|B**||4.0 m||4.0 m||4.7 m|
|C45°||2.7 m||2.3 m||3.1 m|
|D||2.5 m||2.5 m||3.1 m|
|E||3.3 m||3.3 m||4.3 m|
|Min. tractor size***||1,300 kg||1,300 kg||2,000 kg|
* With 2,0 m flailhead
** With 2,0 m Quadsaw or cutterbar
*** Tractor weight can vary from model to model.
The reach of the arm can vary depends on the placing of the arm and head
Mechanical parallel arm is standard on the Twiga Compact series. This makes operating the machine a lot easier, changing the arm reach is done by working just one valve.
The build of the arm
With special focus on material use the arm is build in 6/8 mm spring steel. In areas where more strength is neede, the arm is more heavily built. Along the arms length extra segments are welded on and insdie reinforcements to prevent any wrenching.
For verge mowing float on arm and head is hightly recommended.
Mini Pilot Joystick
The Mini Pilot proportional joystick control system offers easy and precise control of the arm movements.