Twiga COMPACT Combi
- Many variations: Rear, Front and Combi mount
- MiniPilot, electrical proportional joystick control
- Parallel arm geometry
- Lightweight and compact
- Wide range of working tools
Twiga COMPACT combi front mount
Spearhead Twiga COMPACT 320 and 420 s a suitable machine for compact tractors and perfect for municipal and private areas; parks, sports fields, bike paths, orchards - and other places where space is limited.
There are a wide variety of attachment tools for both grass and hedges that extends the versatility and flexibility throughout the season.
On the combi version the arm is mounted in the front of the tractor and the pumpstation in the rear.
There are several reasons to choose Combi Installation of your Twiga COMPACT. If you wish the arm mounted in the front, where the tractor has no front PTO the answer may be Combi - also if the tractor has a low weight, the Combi mount gives a good weight distribution, since the machine's hydraulic pump and tank acts as a counterweight in the rear.
|Technical data||low 360||320||420|
|Horizontal reach with 0.9 m flailhead||3.6 m||3.2 m||4.2 m|
|Vertical reach with Cutterbar HL||4.5 m||4.5 m||5.2 m|
|Transport width||2.0 m||1.8 m||1.8 m|
|Min. tractor size||1,700 kg||1,300 kg||2,000 kg|
|Weight w/o tool||360 kg||380 kg||410 kg|
|Mini Pilot E. Prop. joystickcontrols|
|Float head angle|
|Parallel arm geometry|
|Hydraulic break-back on arm|
|Rear mounted 40 hp pump station independent of tractor (Tandem pump)|
|Cat 1 and 2|
|70 l hydr. oil|
|Optional 540 or 1000 rpm PTO|
Flailhead for Twiga Compact
A small powerful quadsaw with a working width of 1.4 m
Quadsaw with a working width of 1.6 m
Cut and chop in a single pass, with a working width of 1.0 m
Cut and chop in a single pass, with a working width of 1.3 m
Cutterbar for maintenance of hedges and fences
|Front mount||Rear mount|
|Reach||TWIGA COMPACT 360||Twiga COMPACT 320||Twiga COMPACT 420|
|A*||3.6 m||3.2 m||4.2 m|
|B**||4.0 m||4.0 m||4.7 m|
|C45°||2.7 m||2.3 m||3.1 m|
|D||2.5 m||2.5 m||3.1 m|
|E||3.3 m||3.3 m||4.3 m|
|Min. tractor size***||1,300 kg||1,300 kg||2,000 kg|
* With 2,0 m flailhead
** With 2,0 m Quadsaw or cutterbar
*** Tractor weight can vary from model to model.
The reach of the arm can vary depends on the placing of the arm and head
Mechanical parallel arm is standard on the Twiga Compact 320/420. This makes operating the machine a lot easier, changing the arm reach is done by working just one valve.
The build of the arm
With special focus on material use the arm is build in 6/8 mm spring steel. In areas where more strength is neede, the arm is more heavily built. Along the arms length extra segments are welded on and insdie reinforcements to prevent any wrenching.
For verge mowing float on arm and head is hightly recommended.
Mini Pilot Joystick
The Mini Pilot proportional joystick control system offers easy and precise control of the arm movements.