Quadsaw LRS 2402




  • Perfect cutting quality, both thick and thin branches
  • Forward speed = high capacity
  • Power Drive transmission, high efficiency, low power requirements
  • Saw blades with carbide tipped teeth = long life and minimal maintenance (grinding)


Quadsaw LRS 2402 has a working width of 2.4 mQuadsaw LRS 2402 cuts branches up to 21 cm in thicknessQuadsaw LRS 2402's maximum driving speed is 5 km/hQuadsaw LRS 2402 weighs 239 kg


Circular Saw Hedge Cutter


The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.


The Quadsaw LRS 2402 has a huge capacity as it has a large working width of 2.4 m (7’10”) and you can maintain a high driving speed of 5 km/h (3.11 mph). This makes the saw ideal for contractors who perform piece work and want to achieve the highest possible efficiency.


The saw is hydraulic driven and can be mounted on large vehicles used by farmers and contractors. The Quadsaw LRS 2402 can be mounted on telehandlers or front loaders by using our Multi Carrier HXF 3302 attachment frame. It can also be mounted on our boom mowers or directly on backhoes and excavators. We have a large selection of brackets and adapters that you can view in the equipment tab and we constantly develop new ones.



The Quadsaw series fits the following GreenTec machines:



Working width 2.4 m
Number of sawblades 4 pcs. Ø 60 cm
Branch thickness 0,5 - 21 cm
(0.20” - 8.27”)
Required hydraulic connections 1 x double acting + 1 x drain
Minimum oil flow, 28 cc motor 85 l/min, max 150 bar
(22.5 gpm, max 2176 psi)
Alternative min. oil flow, 15 cc motor 50 l/min, max 180 bar
(13.2 gpm, max 2611 psi)
Blade speed 3200 rpm
Driving speed up to 5 km/h
(3.11 mph)
Weight 239 kg
(527 lb)


Blade diameter 60 cm (2’)
Continuous duty motor
Carbide tipped blades
Belt stretcher
Power Band belt drive
Belt tension gauge
Anti-cavitation valve
Large smooth surface
Narrow body
Branch driver at each sawblade
4 circular blades in a line
7° angle allows overlap between the blades
Skid shoe (the saw avoids hitting the ground)
Pressure relief valve
Mechanical quick release
Hydraulic quick release
Oil flow divider
90° hydraulic slew
Rotor with blades  


 = Standard equipment

 = Optional equipment

Standard Equipment
Blade diameter 60 cm
Oil engine 50 l/min, HXF
Oil engine 50 l/min, max 180 bar (22.5 gpm, max 2176 psi)
Oil engine 85 l/min, max 150 bar (13.2 gpm, max 2611 psi)
Carbide tipped blades
Belt stretcher
Power Band belt drive
Anti-cavitation valve
Belt tension gauge
7° angle allows overlap between the blades
4 circular blades in a line
Blade protection
Branch driver
Narrow body
Skid shoe
Large smooth surface

Optional Equipment
90° hydraulic slew incl fitting (OPTE953.3)
Quick coupling hydraulic MID (OPTE3081)
Quick coupling hydraulic PRO/FLEX (OPTE3082)
Adapterkit HXF 3302 incl fitting (OPTE4081)
Blade rotor cpl (4pcs) OPTE4225
50L/min motor w/anticav & fitting (OPTE6080)
85L/min motor w/anticav & fitting (OPTE6081)
50L/min motor HXF incl. fitting (OPTE6080)

Adapter McConnel R incl flowdivider & fitting (OPTE669)
Adapter McConnel L incl flowdivider & fitting (OPTE669.1)
Quick coupling mech Twiga (OPTE3080)
Adapterkit Twiga incl fittings & hose (OPTE4080)
Adapter Mulag with 50 l/min motor and oil flowdivider (OPTE4204)
Adapter Twose incl fitting & hose (OPTE4224)
Adapter Excavator 45° weld-on incl. flowdivider & fitting (OPTE4266)
Adapterkit 50L incl flowdivider, fittings & hose (OPTE6084-50)
Adapterkit 85L incl flowdivider, fittings & hose (OPTE6084-85)
Adapter Excavator "straight" for weld-on (OPTE8011)
9992402R 9992402R
Quadsaw LRS 2402, right
9992402L 9992402L
Quadsaw LRS 2402, left

Cavitation and anti-cavitation:


This product comes with an anti-cavitation valve which is used to minimize the risk of cavitation damage in connection with insufficient inlet pressure.



What is cavitation damage?


Cavitation occurs when the pressure drops below the vapor pressure, which will bring the fluid to boil as the boiling point is reduced. Liquid is converted to gas and then the temperature drops and the gas is converted back into compressed liquid again. If the pressure cannot be adjusted continuously, the above process wherein the liquid is converted to gas and back again will be repeated. In the process where gas is converted back into compressed fluid, small implosions that form heat and noise strong enough to erode metal will occur.


Cavitation and anti-cavitation valve