7 tools
Hedge, tree, weed and fence maintenance
45°
Automatic Hydraulic Security
40 l/min
Minimum oil flow required for vehicle
2-years warranty
High quality materials that ensure a long life
Overview
Multi Carrier Puma 2803 Tele
Our Multi Carrier Puma 2803 Tele offers great flexibility as you can adjust the arm to the terrain. It is an ideal solution for working in conditions with limited space, such as forest tracks, bike paths and orchards.
The Multi Carrier Puma 2803 Tele can be installed on front end loaders and large skid steer loaders in a few minutes. A large selection of tools for hedge cutting and tree trimming is available. It is also possible to mount a barrier mower on the frame.
Powerful features
Protects the machine from overloading when cutting large material
Control the machine from the cabin of your vehicle. No risk of branches falling on your vehicle
Utilize your vehicle throughout the season and switch quickly between tools
Quick jump to
Specifications
Puma 2803 Tele
Reach from center of vehicle to end of tool |
1.4-2.2 m
|
4'7"-7'3"
|
Transport width |
2.4 m
|
7'11"
|
Required hydraulic connections |
1 x double acting + 1 x drain
|
|
Standard oil flow |
40 l/min @ 180 bar
|
10.6 gpm @ 2611 psi
|
Weight without brackets |
175 kg
|
386 lb
|
Under the hood
Puma 2803 Tele
Hydraulic cutting angle control
Change cutting angle on the go
Oil flow divider
Longer life for the oil engine
Automatic break-back system
The arm goes backwards if too much pressure is applied from the cutting objective
Counterweights
Stabilize the weight between the Puma 2803 Tele and your vehicle
Flexible arm
Increase or decrease the working width of the arm
Right and left versions
The Puma 2803 Tele is available in right and left versions
Anti-cavitation valve
Minimize the risk of cavitation damage in connection with insufficient inlet pressure
Mounting brackets
Wide variety of solutions for tractors, loaders and excavators
Hydraulic cutting angle control
Change cutting angle on the go
The hydraulic cutting angle control makes it possible to adjust the angle of the attachment tool via the vehicle's hydraulic control. The attached tool on the Puma 2803 Tele can be adjusted between -20° (vertical position) and 90° (horizontal position).
Automatic break-back system
Protects the machine from overloading when cutting large material
The break-back system consists of a mounted cylinder connected to an accumulator. The accumulator works by ensuring a soft return of the cylinder piston, so that no recoil effect occurs when the oil pressure in the cylinder is affected.
Equipment overview
Hydraulic angle control incl. e-control of all functions* |
Standard
|
Hydraulic switch from working to transport position |
Standard
|
Automatic Hydraulic Break-back with pre-pressure |
Standard
|
Oil flow divider |
Standard
|
Anti-cavitation valve |
Standard
|
Pressure relief valve |
Standard
|
1.5 m (4'11") hose kit for attachment tool |
Standard
|
Euro brackets or universal plate |
Standard
|
Counterweights, 85 kg (187 lb) |
Optional
|
8.5 m (27'11") hose kit (from front loader to tractor rear) - 3 pcs. |
Optional
|
Other bracket types |
Optional
|
* When you buy the hydraulic angle control and the e-control with an oil flow divider, you only need one additional DA connection (and a zero-pressure tank drain where it is required).
Attachment tools
↕️ Range: 1.6 m (5'3")
🌳 Limb: Ø 12 cm (4.7")
↕️ Range: 1.3 m (4'3")
🌳 Limb: Ø 3 cm (1.2")
↕️ Range: 1.7 m (5'7")
🌳 Limb: Ø 6 cm (2.4")
↕️ Range: 1.8 m (5'11")
🌳 Limb: Ø 4 cm (1.6")
↕️ Range: 2.1 m (6'11")
🌳 Limb: Ø 4 cm (1.6")
↔️ Range: 0.6 m (2')
🚜 Pace: 3 kmh (2 mph)
Models
Puma 2803 Tele (40 l/min), left, incl. electric remote control
Puma 2803 Tele (40 l/min), right, incl. electric remote control
Related products
↔️ Arm: 1.3-1.9 m (4'2"-6'2")
⚙️ Tools: 2
↔️ Arm: 1.8 m (5'11")
⚙️ Tools: 6
↔️ Arm: 2.2 m (7'3")
⚙️ Tools: 7
↔️ Arm: 1.4-2.2 m (4'7"-7'3")
⚙️ Tools: 7
↔️ Arm: 2.5 m (8'2")
⚙️ Tools: 8
↔️ Arm: 1.6-2.5 m (5'3"-8'2")
⚙️ Tools: 8
↔️ Arm: 1.8 m (5'11")
⚙️ Tools: 6
↔️ Arm: 2.2 m (7'3")
⚙️ Tools: 11
↔️ Arm: 1.4-2.2 m (4'7"-7'3")
⚙️ Tools: 11
↔️ Arm: 2.5 m (8'2")
⚙️ Tools: 13
↔️ Arm: 1.6-2.5 m (5'3"-8'2")
⚙️ Tools: 13
FAQ
We sell our products through a network of dealers. We encourage you to contact your local GreenTec dealer for more information.
If you need any sales advice or cannot find a dealer near you, feel free to contact us on telephone: +45 75553644 or e-mail: sales@greentec.eu
We are available Monday to Thursday from 08.00 - 16.00 CET and Friday from 08.00 - 15.00 CET.
All products are manufactured in Denmark at our production facilities which consist of 5,500 m². We have employees welding components, assembling machines and checking features before the product is shipped to the customer.
We love to give customers a tour of our factory. If you are planning a visit to Denmark, you can schedule an appointment through e-mail: sales@greentec.eu
Our dealers sometimes do demonstrations. You must contact your local GreenTec dealer and ask if they have any upcoming demonstrations.
You cannot rent GreenTec machines directly through us.
We encourage you to contact your local GreenTec dealer to get a list of customers that might be able to offer this service.