Rotary Hedge Cutter RC 162

GreenTec
GreenTec

STRONG ARGUMENTS:

 

• No cost for the removal, clearance and disposal of cut-off material
• High cutting performance due to clean cut double blade system
• Optimal working environment
• Low noise housing and blade system drive concept designs
• Enclosed cutter housing delivering improved safety
• Reduced wear and maintenance costs

 

Rotary Hedge Cutter RC 162 has a working width of 1.6 m.Rotary Hedge Cutter RC 162 can cut through branches of up to 40 mm. in thicknessRotary Hedge Cutter RC 162's maximum labor speed is 2.5 km/h.Rotary Hedge Cutter RC 162 weighs 200 kg.

 

Hedge trimmer for tractor

 

The Rotary Hedge Cutter RC series is a professional attachment tool designed specifically for hedge trimming and developed for the discerning customer with a focus on:
Cutting Performance, Efficiency and Output, and Working Environment.

 

The GrenTec Rotary Hedge Cutter RC 162 performs three operations in one. It cuts, shreds and disposes the cut-off material. The blade system consists of 18 special hardened blades that assures a clear and consistent cut of branches up to 4 cm in diameter. 

 

 

The Rotary Hedge Cutter series fit the following GreenTec and Spearhead machines:

 

  RC 102 RC 132 RC 162
Multi Carrier HXF 2302 Check mark    
HXF 2802 Check mark Check mark  
HXF 3302     Check mark
Twiga Reach Mower Twiga COMPACT Check mark Check mark  
Twiga MID     Check mark
Twiga PRO     Check mark
Twiga FLEX     Check mark
Twiga BASIC     Check mark
Twiga ORBITAL     Check mark
Twiga COMBI     Check mark
TECHNICAL DATA RC 162
Working width 1.6 m
Number of rotors 3 pcs
Blades per rotor 6 pcs
Max branch thickness 4 cm
Oli flow 50 l/min, max 180 bar
Weight 200 kg


 

 

EQUIPMENT OVERVIEW  
One hydraulic motor
Belt drive
Belt tightener
Double cutting debt blade system
Free swinging blades
Easy blade change
Tool for easy blade change
Gradual cutting angle setting
Support wheel
Rubber flap kit
Enforced body
Clean straight surface
Easy belt drive access
Detachable bottom
Overpressure valve
Anti-cavitation valve
Mechanical quick release
Hydraulic quick release
Oil flow divider
90° hydraulic slew

 

 = Standard equipment,   = Optional equipment

 
Standard Equipment
One hydraulic motor
Belt drive
Belt tightener
Double cutting debt blade system
Performance enhanced cutting angle
360° free swinging blades
Tool for easy blade change
Gradual cutting angle setting
Lean lifter
Rubber flap kit
Enforced body
Clean straight surface
Easy belt drive access
OPTE4240
Adapter Twiga
Adapter HXF 3302

Optional Equipment
OPTE3160
Hydraulic quick release Coupling / Twiga Compact
OPTE3161
Hydraulic quick release Coupling / Twiga MID
OPTE3163
Hydraulic quick release Coupling / Twiga PRO-FLEX
Oil flow divider
9990162 9990162
Rotary Hedge Cutter RC 162

Blade system of Rotary Hedge Cutter RC 162 BLADE SYSTEM 

The blade system differs from the previous models as it is equipped with 6 blades per rotor instead of 4. This increases the cut frequency by 50%, enhancing the capability and create a better shredding effect. The blades are 360 degrees rotatable, which allow each blade to swing back if overloaded.

 

 

 

Hydraulic motor and power belt driveONE HYDRAULIC MOTOR AND POWER BELT DRIVE

The transmission system is Power Belt driven by a centrally placed hydraulic motor. The previous model was equipped with three serially connected hydraulic motors; the new construction is thereby simpler with focus on increased reliability.

 

 

 

Oil outlets and flow

 

RC 102

25 l/min max 180 bar

1 x DA. Max. 15 bar pre-pressure
1 x No pressure return. Max. 1.5 bar pre-pressure

 

RC 132

40 l/min max 180 bar

1 x DA. Max. 15 bar pre-pressure
1 x No pressure return. Max. 1.5 bar pre-pressure

 

RC 162

40-45 l/min max 180 bar

1 x DA. Max. 15 bar pre-pressure
1 x No pressure return. Max. 1.5 bar pre-pressure