Quadsaw LRS 2402





STRONG ARGUMENTS:
- Perfect cutting quality, both thick and thin branches
- Forward speed = high capacity
- Power Drive transmission, high efficiency, low power requirements
- Saw blades with carbide tipped teeth = long life and minimal maintenance (grinding)
Circular Saw Hedge Cutter
The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.
The Quadsaw LRS 2402 has a huge capacity as it has a large working width of 2.4 m (7’10”) and you can maintain a high driving speed of 5 km/h (3.11 mph). This makes the saw ideal for contractors who perform piece work and want to achieve the highest possible efficiency.
The saw is hydraulic driven and can be mounted on large vehicles used by farmers and contractors. The Quadsaw LRS 2402 can be mounted on telehandlers or front loaders by using our Multi Carrier HXF 3302 attachment frame. It can also be mounted on our boom mowers or directly on backhoes and excavators. We have a large selection of brackets and adapters that you can view in the equipment tab and we constantly expand our range.
The Quadsaw LRS series fits the following GreenTec machines:
LRS 1402 | LRS 1602 | LRS 2002 | LRS 2402 | ||
![]() |
HXF 2302 | ![]() |
|||
HXF 2802 | ![]() |
![]() |
|||
HXF 3302 | ![]() |
![]() |
![]() |
TECHNICAL DATA | LRS 2402 |
Working width | 2.4 m (7’10”) |
Sawblades with Widia teeth | 4 pcs: Ø 59.5 cm (4 pcs: Ø 1’11") |
Branch thickness | 0.5 - 21 cm (0.20” - 8.27”) |
Required hydraulic connections | 1 x double acting + 1 x drain |
Minimum oil flow, 28 ccm motor | 85 l/min @ 150 bar (22.5 gpm @ 2176 psi) |
Alternative oil flow, 15 ccm motor | 50 l/min @ 180 bar (13.2 gpm @ 2611 psi) |
Blade speed | 3200 rpm |
Driving speed up to | 5 km/h (3.11 mph) |
Weight | 239 kg (527 lb) |
EQUIPMENT OVERVIEW | |
Blade diameter: 59.5 cm (1’11") | ![]() |
Continuous duty motor | ![]() |
Carbide tipped blades | ![]() |
Belt stretcher | ![]() |
Power Band belt drive | ![]() |
Belt tension gauge | ![]() |
Anti-cavitation valve | ![]() |
Large smooth surface | ![]() |
Narrow body | ![]() |
Branch guider at each saw blade | ![]() |
4 circular blades in a line | ![]() |
7° angle allows overlap between the blades | ![]() |
Skid shoe (the saw avoids hitting the ground) | ![]() |
Pressure relief valve | ![]() |
Saw blades or rotor blades, 4 pieces | ![]() |
Mechanical quick release | ![]() |
Hydraulic quick release | ![]() |
Rotor blades, 4 pieces, retrofitted | ![]() |
= Standard equipment
= Optional equipment






Cavitation and anti-cavitation:
This product comes with an anti-cavitation valve which is used to minimize the risk of cavitation damage in connection with insufficient inlet pressure.
What is cavitation damage?
Cavitation occurs when the pressure drops below the vapor pressure, which will bring the fluid to boil as the boiling point is reduced. Liquid is converted to gas and then the temperature drops and the gas is converted back into compressed liquid again. If the pressure cannot be adjusted continuously, the above process wherein the liquid is converted to gas and back again will be repeated. In the process where gas is converted back into compressed fluid, small implosions that form heat and noise strong enough to erode metal will occur.